A felülvizsgálat egy részét automatikusan lefordították.
Megvettem, mert egy barátom rendelte, mert látta, hogyan vagyok jól érzem magam az én 😉
Egy hónapja vettem, mert számomra újdonság volt a trikopter. Összeraktam, és remekül érzem magam.
It looks very similar to other tricopter on the market. The carbon fiber frame is 3 mm thick and the top and bottom plate are 2 mm thick. The kit came with spare hardware in case you need some. I would strongly recommend to sand all the edges of the frame and plates (it may cut you if you don't take care). The tail mechanism (3D printed) have some play that may affect the flight characteristics. My advise is to print the "impossible tilt" mechanism and avoid using the provided 3D printed parts. Picture attached show all parts of this kit.
Superb tricopter frame
Alig várom, hogy építeni ezt, Szép trikopter.pdb nem tartalmazza
Excelente, se ve como en la descripcion, aun no probado.
Ez az RC felfedező bébi trikopterje, minden részletében azonos az eredeti amerikaival. (egy újabb vereség a jenkiknek, vagy egyszerűen feladták és eladták a projektet az ellenségnek jQuery111306775083749865856_1631977188513?). A hátsó ízületet újra kellett tervezni, mert erős és bármilyen játék nélkül, a szén jól néz ki, és csak szabványos felületekre van szüksége, nincs hiányzó darab.
Nagyszerű, köszönöm.
Alles rendben.
Minden rendben